E-1W FIRMWARE RELEASE NOTES Last Update 2024/04/17 This listing provides the version number, the date of the release, and a summary of the changes in that release for the firmware file for the NTI E-1W(P) Environment Monitoring Systems with 1-Wire Sensor Interface. The E-1W has had changes made to its design. The revised design requires firmware version 3.7 (or newer) to work properly. With an older firmware version you will not be able to set the time. If you downgrade a unit with version 3.7 (or newer) to an earlier firmware, you will need to upgrade it back to 3.7 (or newer) to have the E-1W work properly. Units made after 3/16/22 will require version 3.7. 3.13 2024/04/17 Feature Add: Provides support for configuring with Microsoft Office 365 e-mail accounts using OAUTH. Feature Improvement: Provides improved connection stability with e-mails and the E-1W Web Server. Bug Fix: Improved web server stability when scanned with network scanner. Bug Fix: Corrects a problem such that encrypted emails were not working in the most recent releases. Note: If a device is "downgraded" to an earlier software version than 3.13, the unit will restore to default settings. 3.12 2023/01/10 Feature Add: Provides support for the E-RTDS-MP482 4-Wire RTD temperature sensor and the E-RTDT1W-1562 controller. 3.11 2022/12/02 Feature Add: Provides the option to report an alert when there is a sensor disconnect. Bug Fix: Corrects a problem with losing the Gmail authorization status after a power cycle. Bug Fix: Corrects a problem with emails using hMailServer failing with a -15 e-mail error. Bug Fix: Corrects a problem with the HTTP API feature randomly sending an incorrect JSON message. 3.10 2022/06/22 Feature Add: Adds OAUTH support for sending emails using Gmail. Feature Update: Adds current network parameters in appAll.JSON API Note: If a device is "downgraded" to an earlier software version than 3.10, the unit will restore to default settings. 3.9 2022/04/29 Bug Fix: When the contents of the e-mail recipients list is over 200 characters the E-1W(P) fails to send e-mails and reboots. Bug Fix: Corrects a problem with the e-mail time stamp being incorrect when DST is enabled. 3.8 2022/04/12 Bug Fix: Corrects a problem with the Real Time Clock not maintaining the correct date on the new Rev B circuit boards. 3.7 2022/03/16 Feature Change: Provides support for the E-1W Rev B boards. Units made after this release date require firmware version 3.7 or newer to work properly. Bug Fix: Corrects a problem with some e-mail servers rejecting the message due to a lack of a date / time stamp. Bug Fix: Corrects a problem when a humidity value is close to zero the device randomly fails to respond to HTTP requests. Bug Fix: Corrects a problem with a combination of username and password lengths of over 29 characters results in login failures Bug Fix: Corrects a problem with the E-1W not rebooting properly when there is a user name longer than 16 characters. Bug Fix: Corrects a problem where the hour field in a SYSLOG message is missing the leading 0 for the hours 00 to 09. Bug Fix: IP Camera configuration does not take long URL's Bug Fix: Corrects a problem with system up time field in SNMP reporting incorrect value after 49 days. 3.6 2020/12/11 Bug Fix: Corrects a problem with the sensor move feature not working properly if the web page is refreshed after a sensor is moved. Bug Fix: Corrects a problem with losing sensors if the web page is refreshed after a sensor is moved. Bug Fix: Corrects a problem with the Data Log not working properly after a sensor has been moved. Bug Fix: Corrects a problem with the Digital Input 2 SNMP Trap ID. This requires the updated v1.02 MIB file. 3.5 2020/09/04 Feature Add: Adds the ability to move sensors up or down the sensor list, including adding spaces between sensors. Bug Fix: Corrects a problem with incorrect SNMP Trap OIDs. This requires the updated v1.01 MIB file. 3.4 2020/07/31 Bug Fix: Corrects a problem with units automatically re-booting after receiving a non-standard SNMPV2 packet. 3.3 2020/07/17 Feature Add: Adds support for MODBUS Function Code 2 which can then read the on-board Digital Inputs. Bug Fix: Corrects a problem with units not responding after receiving a non-standard SNMP packet. 3.2 2020/06/09 Feature Add: Adds support for MODBUS polling. Feature Change: Provides improved color contrast when performing menu selections. Feature Change: Changes the Model name in the web interface from "ENVIROMUX-1W" to "E-1W" Bug Fix: Corrects a problem with the units not logging out properly in some web browsers. 3.1 2019/08/21 Bug Fix: Corrects a problem with the time stamps not showing up when the data log is downloaded. Bug Fix: Corrects a problem with the Digital Input values not being correct in the data log. Bug Fix: Corrects a problem with the E-DI2-1W values not being correct when the E-1W is used as an IP Sensor with the E-xD. (This was broken in software version 3.0) 3.0 2019/02/20 Feature Change: Removes SSL and adds TLS V1.2 encryption for increased security. This adds support for Gmail, Office 365, and other e-mail servers that use TLS encryption. Feature Change: Improves support for SNMP V3 This adds Privacy encryption via DES Note: This update will disable the SNMP agent selection. You will need to re-select the desired SMNP Agent. Feature Change: Sets DHCP with Failover as the default network setting Feature Change: Updates the SSL Certificate expiration date. Feature Add: Adds the ability to assign custom alert names. Bug Fix: Corrects several problems with network stability. Bug Fix: Corrects a problem with the NTP function not properly updating the system time. Bug Fix: Corrects a problem with the E-1W not sending the correct configuration data to the E-MNG or E-MNG-LC management program. 2.8 2018/05/08 Feature Add: Adds support for JSON API to poll sensors using a HTTP or cURL command. 2.7 2018/03/05 Bug Fix: Corrects a problem with the temperature sensors reporting -16° and -32°C in error. Bug Fix: Corrects a problem with incorrect E-1W-DI2 status values sent to the E-xD when the E-1W is used as an IP Sensor. 2.6 2017/12/04 Bug Fix: Corrects a problem with setting temperature alert thresholds below 0° (negative values). Bug Fix: Corrects a problem with the support links not connecting to the correct web pages. 2.5 2016/09/09 Bug fix: Corrects a problem with E-DI2-1W digital input alerts not working properly. 2.4 2016/04/28 Bug fix: Corrects a problem with properly displaying the Alert web page when there are 24 or more alerts configured. 2.3 2016/04/18 Bug Fix: Corrects a problem with the E-DI2 sensors for the E-1W when both inputs are closed. Bug fix: Corrects a problem with SNMP not displaying the Alert information 2.2 2016/03/29 Feature Add: Adds support for the E-TH1W sensors made with new RevA circuit board. Improvement: Changes the way an E-1W is identified during boot up for improved reliability. 2.1 2016/03/11 Bug Fix: Corrects a problem with identifying an E-1W unit on start up or power cycle. 2.0 2016/02/03 Initial release.