Environment Monitoring System Tamper Switch & Emergency/Panic Button

Motion/Intrusion/Vibration Sensors compatible with ENVIROMUX®E-2D, E-5D and E-16D

Tamper Switch & Emergency/Panic Button

Tamper Switch

E-TDS - Tamper
E-TDS
  • Tamper switch for drawers and alarm boxes.
  • Sends activation signal when tamper switch is released.
  • Silver-plated contacts ensure reliable long-term operation.
  • High-impact white plastic case, screw terminals.
  • Screw terminal
    • Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
      • To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
      • To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Maximum cable length: 1,000 ft (305 m).
  • Normally-open contacts at rest, closed contacts when depressed.
  • Operating temperature: -13 to 158°F (-25 to 70°C ).
  • Dimensions (WxDxH): 2.74x1.12x0.63 in (70x28x16 mm),
Downloads & References
NTI Part # Price Quote Buy
E-TDS $8.00

Emergency/Panic Button

E-EBS - Emergency/Panic Button
E-EBS
  • Sends activation signal when button is pressed.
  • For normally closed or normally open circuit connections.
  • Screw terminal.
    • Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
      • To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
      • To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Maximum cable length: 1,000 ft (305 m)
  • Dimensions WxDxH: 0.9x0.6x3 in (23x14x76 mm)
  • Regulatory approvals: RoHS
Downloads & References
NTI Part # Price Quote Buy
E-EBS $4.00

Back to Top